Sparking machine operation steps

Comments · 126 Views

At present, because of its high durability and high accuracy, people have a growing demand for the use of spark machines in daily life. Next, let's talk about the steps of sparking machine in normal operation.

At present, because of its high durability and high accuracy, people have a growing demand for the use of spark machines in daily life. Next, let's talk about the steps of sparking machine in normal operation.

①Turn on the current, turn on the power supply of the machine tool, move the three axes, search the mechanical coordinates of the three axes, and pump the oil manually once when the machine tool is on standby. ②Receive the machining drawing and workpiece, and receive the machining coordinate drawing and corresponding machining parts from the team leader. When receiving, the position of parts shall be clear, and processing instructions shall be written for key parts. ③Place the received workpiece on the clean magnetic table of the machine tool according to the correct processing method, and then calibrate the center.④When calibrating the sparking machine, pay attention to whether the electrode direction corresponds to the working surface, check whether the workpiece plane is flat, and whether the workpiece travel is sufficient; During centering, pay attention to that the centering position must be flat and free of burrs, the centering position must be at the same height, and must be reset and checked after centering.⑤Put forward the problems you don't understand before the processing operation and contact the team leader to solve them together. When starting to discharge, in order to avoid abnormalities, observe for 3-5 minutes before leaving. After processing, the size of the discharge part shall be checked with a measuring tool to avoid size error. ⑥Input the corresponding coordinate value and parameter conditions according to the given spark position, coordinate and depth. ⑦Place the workpiece that has been discharged at the designated position, and then return the working drawing. Only after filling in the relevant record form can other drawings be received. ⑧After work, each operator must clean the machine tool he is responsible for and maintain the equipment according to the equipment maintenance method.

The above is the operation steps of the sparking machine. I hope it can help you to use the sparking machine correctly.

sparking machine

Comments