6 Different Ways to Maintain Your Vaporizer 

Vaping is one of the top nicotine delivery devices that has been in the spotlight for quite a while. It presents a way for people to enjoy concentrate, nicotine, and others without dealing with the side effects posed by other nicotine delivery devices.  

Vaporizers, however, are pretty delicate, which calls for proper maintenance. This is important to avoid issues with the vape device and preserve its life. While vaping seems cool, clean, and accepted compared to other nicotine delivery systems, it also comes with some responsibility to clean and maintain the device.  

One of the advantages of vape devices over other nicotine delivery devices is the saving in terms of cost. Even with this, the initial investment might be high as vape devices are not cheap. As a result, one needs to maintain the device to keep it in good condition and prevent mishaps.  

Here are six ways to maintain your vaporizer: 

1. Know Your Device 

A suitable vape device is an investment. It is different from other nicotine delivery devices that you use and dispose of almost immediately. It is essential to develop a relationship with your device by knowing it. This is primal to getting the best from such a device.  

It is typical of vape devices to produce gunk – filthy remains from concentrated materials. Such gunk will build up and accumulate if you don't clean your device. As expected, this will affect the optimum function of such a device as you will experience huge draw resistance, reduced lifespan, and others.  

Good knowledge of your vape parts will make cleaning and maintenance easy. As a result, cleaning every part and component will not pose an issue. Each time you spend cleaning your device will discover something about it, enhancing your relationship with it.  

1. Cleaning Your Tank  

Removing the coil is one of the first steps for people with vaporizers with a detachable tank. Separate the pen from the tank and empty any residue. After trying to pour, couple the device and power the pen for about two minutes if you have any left. This will help burn off any stubborn residue. After this, separate the tank and use warm water to clean the parts. 

Be careful with battery sections, charging points, and others while cleaning. Ensure to wipe the water off the parts after cleaning. Cleaning might be pretty challenging for people who vape with a one-piece vaporizer, as water is not recommended to clean the device. Use a Q-tip soaked in propylene glycol to wipe the inside of the device. After, clean up using a dry Q tip. 

1. Stay Away from Sweetened e-Juice 

You will be better off with premium vape juice. Avoid sweetened ejuice, especially when your coil burns out too fast, or there is a coil gunk.  

Watch out for the taste of the vape juice. Anything like candy or a sweet aftertaste on the lips during or after vaping points to the presence of sucralose – an artificial sugar in it. This will affect the device's lifespan. 

Use  tfn nicotine for sale and other unsweetened ones for the longevity of your coil.  

Photo by Clear Cannabis on Unsplash 

1. Maintain the Battery Health 

The way you use and charge your device can affect the battery. There is an optimal usage routine that can influence the lifespan of the battery.  

For instance, you might want to store your device for a long time. The best idea is to charge it halfway. This helps put little stress on the battery cell and prevents it from losing charge. 

People who recharge daily due to frequent use should prevent the device from going below 20%. Also, while charging, it is best left around 80%. Leaving a battery at full charge places it under a lot of stress. Similarly, leaving a battery at 0 is not healthy as it will need high power to pick itself back up.  

Also, don't be carried away with the concept of quick charging. The battery's lifespan takes a hit as it heats up faster, raising its temperature to abnormal levels. Excessive temperature is not suitable for all batteries.  

1. Care for the heating Chamber 

The heating chamber is where the magic happens. This is where the vape juice is heated, which produces the vapor inhaled. It is also called a tank or chamber and comes in various materials like stainless steel, glass, strong plastic, etc.  

Being a place that experiences excessive heat, wear and tear are not avoidable. You can clean this with a cotton swab soaked in isopropyl alcohol. With this, getting rid of the buildup of any residue on the edge of the device is possible.  

1. Ensure to Prime Your Coil 

For new vape kits, priming is an essential strategy to make it last longer. Priming the device involves passing the vape juice in the coil’s hole head where the wick and vape juice meet. With this, the coil will not burn as it provides a clear path for the liquid to pass through the coil.  

When done with this, take a few dry hits, but don't fire the device. This will allow you to soak the wick with the juice. After this, power the device and vape. However, vape at low temperature if you are using a variable wattage vaporizer. Gradually work your way up to get the best of your device.  

Photo by Rafael Barros from Pexels 

Conclusion  

Maintenance of your vaporizer is primal to enjoying the device. This article has discussed several simple ways to maintain such a device and keep it in good health.